UPS finally dropped my much anticipated Kaze Ko-Katana outside of my house last night (they didn’t bother to knock on the door, as usual). You might want to read the introduction to this full review here.. I am not a sword afficcionado, but I do know quite a bit about knives. This is my first katana, and I will try to provide an objective and complete review, though I have no other sword to compare it to. The closest would be my Cold Steel Master Tanto; apples and oranges..
The sword came in a nice wooden box, cheaply made, but nevertheless attractive and practical. A lined sword bag is included, also much appreciated for the price.
My first impression upon picking up the Kaze was that of a solid chunk of steel, well built and fitted. There is no “rattling” of any kind, nothing moves. The blade feels heavy, though I am sure not as much as a full size katana, which I have never handled. The short blade makes it comfortable to hold. For a beginner like me, it is important to track your blade in space as you move it around. Friends, pets and significant others will appreciate that.. Better have nobody around actually, that is much safer. Two things jump at you while looking at the blade: The natural hamon looks great. It is subtle, but obviously authentic in it’s beauty. The kissaki (tip) however is awful. More on that later. The sword feels very agile.
The blade is short, 20.5 inches. Mine has a brown cotton ito wrap, which is very tight. As I understand, it is also available in black. One menuki (handle ornament) is located on the left near the tsuba (guard), the other one on the right near the kashira (pommel). They feel good under your fingertips and improve your grip. The mekugi (pins) are set at an angle, which I guess is to clear the ito wrap so that the tsuka can be removed without unwrapping the handle. One is bamboo, the other one appears to be brass. I don’t see how the blade could possibly come loose with this setup. The saya (scabbard) is lacquered glossy black, and attractive from the outside. There is no reinforcement at the mouth, so I expect it to crack soon or later. Except for a slight difference in blade length, the specifications are pretty much what Mark Mowrey has in his excellent review.
The blade is made of 9260 spring steel with a differentially hardened edge by the traditional clay method. As mentioned before, the hamon looks great. I would not want a fake hamon except for a back-yard beater, and even then.. Fake is just that, fake. One might argue that a blade forged in China is fake, but I disagree. Chop your finger off, and see if fake blood comes out.. The polish is decent, certainly sufficient for a $200 sword. The kissaki however is the hair in an otherwise delicious soup.. I can see file scratches on the tip, as clear as day. It looks like someone was doing a great job on the blade, then ran out of time and thought “the hell with it, it’s done.” I would have been glad to pay $40 more for a decent job. Lucky me, I own a Dremel! I can imagine people raising their eyebrows there, but remember, this is a cheap sword. I couldn’t get it any worst than it already was anyway. I went to work with a buffing wheel and polishing paste. The look improved slightly, but not as much as I hoped. I just didn’t want to waste any time on it, as I was eager to fill some plastic bottles.. Sharpness at first was disappointing. The edge was sharp mind you, but did not shave hair like my Master Tanto. It did cut paper well, but not every time. I worked on it for a few minutes with a fine stone, then took it to my leather belt. Finally, I managed to clear-up a bold patch on my arm. With the proper tools and a little time, this blade could be frighteningly sharp. Time to head for the backyard!
Though I tagged the following video as a “cutting test,” it was my first ever cutting session. My lack of technique is obvious, but I managed a couple decent cuts. 2” palm frowns offered no resistance at all. My friend Erin brought his stainless steel wall-hanger fantasy sword for a try. We made sure the area was clear in case it came apart. No such concern with the Kaze.
[kml_flashembed movie="http://www.youtube.com/v/wEydRijPb4U" width="425" height="350" wmode="transparent" /]
Click on the image to enlarge..
My second cutting session was very educational. I went to cut palm frowns in the backyard. Sometimes the blade would go right through with no resistance at all, and sometimes I would feel a vibration through the tsuka. Re-enacting my movements slowly showed me that I was rotating my wrist, getting the wrong angle at the time of contact. As much as 15 to 20 degrees off! No wonder the frowns would just break sometimes. After correcting my grip, I could barely feel the cuts. This tameshigiri business isn’t easy. With my new confidence, I moved the the bamboo we have in the back.. It proved harder to cut, but with the right angle and swing, chop! 3/4” (nothing thicker in the yard), that’s enough for me, I’ll need much more practice before trying anything harder.
Historical accuracy: 3/5 – I don’t know! I am sure it detracts quite a bit from an original though.
Fit and Finish: 3/5 – If it wasn’t for the kissaki, I would have given it a 4.
Handling: 4/5 – It feels great in my hands. The short blade is quite fast.
Structural Integrity: 5/5 – I don’t see how I could possibly break it in normal use.
Value: 5/5 – Unbeatable price for a hand-forged sword with a real hamon.
Pros: Cheap. Very strong. Beautiful hamon. Tight fittings.
Cons: Rough kissaki. Not as sharp as I thought (easy to fix).
Conclusion: A very good sword for the price. I tend to look at safety first when buying a practical weapon. The Kaze Ko-Katana does not worry me a tiny bit in that department. I do not think you can find a better deal for a hand-forged, differentially hardened blade. If Cheness spent a little bit more time on the tip, they could sell this sword for at least $50 more, if not $100. I am not worried about bending it on a bad cut either. It would take quite a mistake to bend it permanently. If the kissaki had been as well polished as the blade, I would have bought a Tenchi for cutting. As it is, the Kaze will be my backyard cutter. If I damage it, I can always buy another! I would recommend it to anyone, especially as a first time sword purchase. Even if you are not into cutting, it can make a nice display piece (polish the tip!) or an excellent home self-defense weapon.